Mon–Fri 07:00–17:30 · Sat 07:00–12:00Mon–Fri 7–17:30 · Sat 7–12 Baumgartenweg 3, 8134 Adliswil Report a fault infrahaustechnik@gmail.com

Heat pump in Adliswil

Heat pump in Adliswil – Advice, installation and maintenance

Would you like to switch from oil or gas to a heat pump or have your existing heat pump serviced? We advise you in Adliswil and on the Zimmerberg, install the system, commission it and remain available for maintenance.

  • Over 15 years of experience in building services
  • Service also for third-party systems
  • Mon–Fri 07:00–17:30 · Sat 07:00–12:00
Boiler room with storage tank, expansion vessel and galvanised pipework, installed by Infra Haustechnik

Photo: own installation

The switch begins with a good survey

Whether an air/water heat pump or a ground-source heat pump is suitable depends on the building, the plot and the existing heat distribution. During the site visit we look at the boiler room, radiators or underfloor heating and the possible location of an outdoor unit.

We take care of advice, planning and design, the documents for notification or building permit, installation and commissioning – and the maintenance of existing heat pumps, even if they were installed by another company.

Services

Our services relating to heat pumps

  • Advice

    Which heat pump suits the house, plot and heat distribution?

  • Planning & sizing

    Determining heating output, dimensioning the heat pump, planning installation site and pipe routing.

  • Notification & building permit

    Compiling and submitting documents for the building authority, including the noise protection certificate.

  • Installation & commissioning

    Professionally installed, adjusted and explained to you.

  • Heating replacement

    Removing the old system, installing the heat pump – all from a single source.

  • Upkeep

    Maintenance and repairs of existing heat pumps, including third-party systems.

Brand-independent – all manufacturers, including: MHI · Mitsubishi Electric · Daikin · Samsung · Toshiba · STULZ · Fujitsu · LG · Gree

Good to know in the Canton of Zurich

Since 1 January 2023, many heat pumps in the Canton of Zurich can be installed under the notification procedure: indoor air/water heat pumps, outdoor units up to 2 m³ in volume and ground-source heat pumps. If nothing else is ordered within 30 days, construction can go ahead. In core zones and with townscape or monument protection, outdoor air/water heat pumps still require a permit (Source: Canton of Zurich).

For air/water heat pumps, a noise protection certificate according to Cercle Bruit enforcement practice is always required (Source: Canton of Zurich). Ground-source probes additionally require a water protection permit.

For a neutral initial consultation, Energie Genossenschaft Zimmerberg (EGZ) offers the “renewable heating” impulse consultation for Adliswil and the Zimmerberg municipalities (e-zimmerberg.ch).

Official information without guarantee – the requirements of the canton, municipality and federal government are authoritative.

Process

How we work

  1. 1

    Enquiry

    Briefly describe the building and current heating.

  2. 2

    Site visit & sizing

    Checking the boiler room, heat distribution and location, calculating output.

  3. 3

    Quote

    With options and schedule.

  4. 4

    Permit

    Notification or building application incl. noise protection certificate.

  5. 5

    Installation

    Installation, commissioning and instruction.

  6. 6

    Upkeep

    Maintenance as required or with a contract.

FAQ

Questions about: heat pumps Adliswil & Zimmerberg

Do I need a building permit for a heat pump?

In the Canton of Zurich, the notification procedure with the building authority is sufficient for many heat pumps. Exceptions apply e.g. to outdoor air/water heat pumps in core zones or with monument protection. For air/water heat pumps, a noise protection certificate is always required. We compile the documents on request.

Does a heat pump also work with radiators?

That depends on the required flow temperature and the building. We check your existing heat distribution during the site visit and discuss what is needed.

Air/water or ground-source probe?

Ground-source probes need space for drilling and a permit; air/water heat pumps need a suitable location for the outdoor unit and a noise protection certificate. We clarify on site which option makes sense.

Are there subsidies?

The canton and municipalities have their own funding programmes, which can change. Current information is available from the Canton of Zurich or your municipality; EGZ offers a neutral initial consultation on the Zimmerberg.

Do you maintain existing heat pumps from other installers?

Yes. We take care of the maintenance of existing heat pumps – including systems we did not install.

Let’s discuss your project

Call us or write to us – we will get back to you and arrange a site visit.